AUTONET TV

Getting the Right Tires and Wheels in Porter

A lot of people get custom wheels in Porter. When you do this yourself (over the internet . . .) you could run into trouble if you're not careful. Sometimes, once they're mounted, they just don't fit right. The tires rub in turns or on bumps. You don't want that.

Consulting your Houston ADAS tire professional can ensure you get the right fit. First he'll ask you a series of questions about your Porter driving needs and what you want in your new wheels. Now, not every wheel can go on every car. Care must be taken so that tires and wheels are not too large or that the wheel is centered too far towards the outside or the inside so the tires rub.

If you don't want to make any modifications to your vehicle, you would need to focus on the wheels that would fit. With trucks, some people in Porter like much bigger tires so they need a suspension lift.

Also, most Porter drivers don't realize that you need to keep the rolling diameter of your new tires – the overall height of the tire – very close to what came from the factory in order for your vehicle's anti-lock brakes and stability control systems to work properly.

The computers that control these systems are calibrated to a certain size tire. When you go bigger or smaller, the computer doesn't know what changes you made so it can't tell how fast you're going. This, of course, means it sends commands to the brakes and traction control that are based on the wrong speed. If you go with a different rolling diameter, your vehicle engine control computer can be reprogrammed for the new tire size.

Either way, there are hundreds of wheel and tire choices to choose from in TX. You can pick the style of wheel you want and then talk with your friendly and knowledgeable Houston ADAS tire professional about how big the wheel should be – and how to select the right tire for your vehicle. Your Houston ADAS service advisor will help you find the best tire to meet your style, performance, ride and handling needs in Porter.

Houston ADAS
22321 E Martin Dr Porter
Porter, TX 77365
(281) 354-8700
http://houstonadas.net

Trickle Down Technology

Recently, Nissan introduced the latest version of its Leaf, the company's electric car. It has many new features, including something called e-Pedal. It allows the driver to let up on the accelerator and, unlike a gasoline engine car, the Leaf doesn't just slowly lose speed; letting off the throttle pedal brakes the car in a very controlled way, using regenerative and sometimes friction brakes. With practice, a driver can go for a fairly long time without touching the brake pedal.

Another system, similar to those found in self-driving vehicles, can steer the car to keep it in the center of the lane using a camera and radar. It literally watches the lane markers and, of course, doesn't work well in snow that obliterates those markers. But the technology is impressive and can greatly reduce fatigue on long trips.

In fact, much of this technology has "trickled down" from research on autonomous vehicles, such as adaptive cruise control that slows down your vehicle (even to a stop) if the vehicle in front of you decelerates or stops. And we can expect these features will eventually find their way into all price levels of vehicles if the past is any indication.

There was a time anti-lock brakes were only found on premium vehicles; now they are on nearly all new vehicles. Traction and stability control are also prevalent, helping drivers reduce slippage and maintain control, thanks to computers.

With SUVs and trucks so popular, rear backup cameras help drivers see behind their tall back ends, reducing injuries, deaths and property damage. Bumper sensors and cameras allow drivers to be visually and aurally aware of their surroundings with 360° protection.

Many of these features improve our vehicle's safety and efficiency, and we can expect new technologies to crop up in the future. But just like the mechanical systems in your vehicle, it's important to maintain the electronic and computerized systems. Technicians at Houston ADAS constantly train to keep up on these latest developments. Make sure all your vehicle's components are maintained in top condition.

Houston ADAS
22321 E Martin Dr Porter
Porter, TX 77365
(281) 354-8700
http://houstonadas.net

Houston ADAS Maintenance Tips: The Belt Goes On

All Porter service advisors know that without the alternator, the battery will go dead in a few miles.

The serpentine belt may also run the pumps for both the power steering and power brakes. And on many vehicles, the serpentine belt powers the water pump. The water pump circulates coolant through the engine to keep it within normal operating temperatures. (On some vehicles, the water pump is powered by the timing belt instead of the serpentine belt.)

So you can see the serpentine belt does a lot of work. And it if breaks, it affects a lot of systems. That's why your vehicle manufacturer and your service advisor at Houston ADAS have recommended that it be changed every so often so that it doesn't fail.

Your friendly and knowledgeable Houston ADAS service advisor can perform a visual inspection of the belt to see if it has any cracks that signal the belt could fail soon and will measure the amount of belt material to make sure there is enough.

Your serpentine belt works in tandem with a spring loaded pulley attached to the engine called the tensioner pulley. Its job is to make sure there's a constant tension on the serpentine belt so that it doesn't slip. The spring can become worn and no longer provide the necessary pressure to keep the belt tight. At Houston ADAS in Porter, we recommend that the tensioner be replaced at the same time as the serpentine belt.

Houston ADAS
22321 E Martin Dr Porter
Porter, TX 77365
(281) 354-8700
http://houstonadas.net

The Turn Signal Mystery (Turn Signal Problems)

Some problems are easy to diagnose on a vehicle; others aren't.  Figuring out what's wrong with a malfunctioning turn signal sometimes fits into both categories.  By the way, if your tempted to just leave your broken blinker broken, remember you can get a ticket for not using them, not to mention you are missing a great chance to communicate your intentions to other drivers on the road.

There can be lots of signals that your signals are on the blink.  Does only the driver's side signal not work or the passenger's side? Do your hazard signals work? Do the lights illuminate but not flash? Can you see the indicators on the dash blinking? Do your turn signals turn off after you've finished your turn or do they stay on?  These are all great clues for the technician.

Here's one common symptom to take note of.  Your signal all of a sudden starts blinking much more quickly than it used to.  It could be a simple as a burned out bulb.  But there are many different parts that go into the turn signal system.  There are fuses that blow, switches that can fail, flasher modules that go bad and light bulb sockets that can simply get corroded or dirty.  When that happens, it's possible there's no contact between the bulb and the socket.

So it's understandable how tracking down the source of the problem can involve some detective work.  Your service facility has equipment that can nail down the cause of your problems. They may also consult the repair manual.  One thing to be aware of: if your vehicle has airbags, they may have to be disabled so they don't accidentally go off.

You can make sure your turn signals are working correctly by having them checked by a trained technician.  Other drivers will thank you for showing them the courtesy of signaling your intentions.  It's a courteous and considerate thing to do, not to mention it makes the road a safer place. 

Houston ADAS
22321 E Martin Dr Porter
Porter, TX 77365
(281) 354-8700
http://houstonadas.net